New Products 2015
Variety is our strength
With the solutions provided by our brands LEYBOLD, ELWE TECHNOLOGY and FEEDBACK we can provide you with a comprehensive range of didactically prepared technical teaching systems.
These systems can be used in the following areas of teaching and learning: Vocational Schools, Master Craftsman / Technical Schools, Universities and Universities of Applied and Sciences as well as In-Service Training.
Below you will find an overview of our innovations we would like to present.
Detailed information on our entire BQ innovations 2015 here (PDF).
COM3LAB - THE COMPACT ELECTRONICS LABORATORY
3 COMPONENTS BECOME ONE LABORATORY
COM3LAB is used for training and further education in electrical engineering and electronics and provides both theoretical and practical knowledge transfer from a single source. The subject matter is not only taught theoretically, but is also deepened by the use of practice-oriented experiments.
COM3LAB consists of a Master Unit and various courses - a course includes an experiment board and learning software. The Master Unit is the basic device via which the software and the experiment board communicate with one another. The COM3LAB learning environment combines experimentation with the advantages of interactive e-learning.
The new Master Unit is the bridge between the experiment board and the learning software. It contains all necessary measuring instruments and power supplies and possesses many significant improvements compared with its predecessors:
- Support for wired and wireless PC interfaces
- Luminous strip makes the system status display visible from a distance
- Anti-theft protection through Kensington lock
- Suitable for inclusive learning through two separate audio outputs
- Support for tablets 2 mm safety sockets and cables
Detailed information about COM3LAB catalog "Multimedia Laboratory of Electronics and Electrical Engineering", click here.
COM3LAB - SOFTWARE UPDATE
COM3LAB Starter
- Simple start of the courses regardless of the interface used (USB, LAN or WiFi)
- Automated recognition of courses
- Secure user logon for loading and saving the learning status
COM3LAB Configurator
- For convenient user management, also for different learning groups
- With a comfortable integrated network management in the classroom
by the teacher and the administrator
COM3LAB Supervisor
- For assessment of learning progress by the teacher
- Integrated online and offline mode with classes, students and course view
COM3LAB course software
- Updated course contents
- Operation concept suitable for tablets
- DEMO mode for all available courses, also without hardware
AUTOMOTIVE TECHNOLOGY
ELECTROMOBILITY SYSTEMS ENGINEERING AND HIGH VOLTAGE TECHNOLOGY
THE ELECTRIC VEHICLE IN THE WORKSHOP
As vehicle electrics have largely been considered safe up until now, increased awareness of dangerous contact voltages and the targeted teaching of new safety measures and procedures are now required.
For this purpose, LD Didactic has developed a trainer on which trainees can practise the disconnection of electric vehicles in a manner similar to actual practice. The system has been designed to allow measurements to be carried out on both potential-free and live components. All measurements/exercises can be carried out without risk to the trainee and with no requirement for special protective equipment. For example, the disconnection of HV components under load as a learning situation can also be performed without risk, whereby it is still possible to see the impressive effect of the arcing when the high-voltage cable is cut.
- Integrated fault switch
- Construction of electrical networks
- Check HV voltage
- Criteria for the use of test devices
SENSORS AND ACTUATORS IN VEHICLES
AUTOMOTIVE PLUG-IN SYSTEM 2.0
Special vehicle sensors and actuators are mounted in or on plug-in elements to enable their fundamental functions to be easily investigated. The new option of colour printing on elements makes correct wiring more simple.
- Original components in transparent housings
- Very robust design Construction identical to circuit diagram
- Component symbols conform to
- ISO standard
- Surfaces printed in colour
Equipment Set A1.1.1.2 Sensors in Automotive
RENEWABLE ENERGY TECHNOLOGY
ELWE Technik Wind Power Plant
With the "Wind Power Plant" experimental rig is an outstanding educational system of renewable energy generation. The student first acquires the basics of electrical power generation through exploitation of the kinetic energy existing in the wind. The student learns several common methods of connecting the asynchronous generator to the grid for channelling off energy.
Equipment set R3.2.1.1 Wind Power Plant
ELECTRICAL ENGINEERING
ELECTRICAL MACHINE TRAINER - TAKE-APART MACHINES
With this teaching system, electrical machines for mains voltage (400 V) are constructed and investigated. The topics are very varied and range from the basics of magnetic electrical circuits to commutator machines and three-phase machines. All relevant components of the motors are visible and must be connected up mechanically and electrically.
The different types of machines can be fully characterized in experiments are measured and compared.
Equipment Set 762 101 System: Electrical machine trainer
Equipment Set 762 102 MPS set: Electrical machine trainer
TAKE-APART MACHINES - INTERCHANGEABLE ROTORS
These new didactic machines consist of prefabricated industrial rotor and stator assemblies in the 300 W class. The ready-to-operate electrical machine emerges only after all components have been assembled.
The stator housing is mounted on a base and can be connected directly to the machine testing system 0.3 (731 989USB). The stator and rotor are connected securely using star grip bolts which allow a rapid change of the rotor. The rotors are equipped with a B-endplate, fanwheel, cover cap and, if required, slip-rings, brushes, etc.
- Comparison of the efficiencies and characteristic curves of machines with different rotors
- Simple assembly for short set-up times and time-effective laboratory experiments
- Comparison of aluminium rotors and high-efficiency rotors
Three-phase stator 747 720
Short circuited rotor 747 721
Slip-ring rotor 747 722
Non-salient pole rotor 747 724
Reluctance rotor 747 725
High-efficiency rotor 747 729
MEASUREMENT AND CONTROL - CONTROL SYSTEMS AND CONTROLLERS
CONTROL SYSTEMS
- Digital liquid control system
The liquid control system is a model system for measurement and control systems useful for both demonstration and student experiments. The liquid control system consists of a reservoir, a measuring tank and a pump, as well as sensors, valves and microprocessor-controlled electronics with an integrated power amplifier. The liquid control systems permits experiments to be performed on two independent technical processes:
- Flow rate
- Fill level
Digital liquid control system 734 265
CONTROLLER - TWO-POINT CONTROLLER
For discontinuous control systems, with weighted input summing unit for reference variable and control variable, measurement point for control errors. With 7-segment display for output status and hysteresis. Particularly suitable for use in temperature control circuits or fill-level experiments.
Two-point controller 734 011
PID DIGITAL CONTROLLER
Standard industrial compact controller with fast microprocessor control for use as a P, PI, PD or PID controller in continuous control systems. With weighted input summing unit for two reference variables and one control variable, measurement point for control errors, display of control error tendency with three LEDs.
PID digital controller 734 064
COMPACT CONTROLLER
Compact controller with programmable timing function based on the SIEMENS SIPART DR 19 with continuous output; analogue display; analogue input with signal converter for voltages +/- 10 V; direct sensor inputs (TC / RTD / R), two binary inputs and outputs; with interface module.
Compact controller 734 431
ELWE Technik - ASIMA
THE TRAINER FOR SPS AND LOGO
The tried and trusted trainer for programming electrical control systems has been revised. Owing to the large number of plant simulations, the trainer is able to give the trainee an understanding of the entire spectrum of control programming in small steps. Here it is an advantage that the simple plant simulations can be performed with either a small control system (LOGO from Siemens) or with a PLC. Three different packages are available for plant simulations as overlay mask sets for the ASIMA trainer.
In the case of ASIMA, the programming stands in the foreground, not the wiring. The wiring is carried out via a 50-pole cable, which makes it possible to connect the PLC directly to the ASIMA.
Equipment Set T9.5.1.19 ASIMA Plant Simulator
ELWE Technik - AMIRA
THREE TANK SYSTEM
The system consists of three Perspex cylinders. These are connected together in series via cylindrical connection channels. To simulate blockages or faulty operation, all connection channels, as well as the normal outflow channel, have manual valves that make it possible to close off particular channels.
To simulate a leak, each tank has a further circular opening with a manual
valve attached connecting, via a pipe, to the reservoir. Faults in ancillary components, such as pump defects, sensor failures, or poor scaling of sensor
signals, can be set on the control unit using potentiometers and switches.
AMIRA Three Tank System Equipment 773 401
AMIRA Single Tank System 773 412
Detailed information on our innovations and highlights for 2015 is available here (PDF).